HLSQ-1000 Automatic Stone Cutting Machine for Precise Granite Countertop Fabrication

For stone fabricators, countertop manufacturers, and professional workshops, consistent cutting accuracy is just as important as production speed. A reliable bridge cutting machine should handle different stone materials, support practical cutting sizes, and make daily operation straightforward.

The Hualong HLSQ-1000 is an automatic bridge-type stone cutting machine designed for efficient slab processing. With a blade range of Φ400–1000 mm, a maximum cutting length of 3500 mm, and a maximum cutting thickness of 400 mm, it provides a practical solution for granite, marble, quartzite, and artificial stone fabrication.

The HLSQ-1000 is designed around the needs of stone processing workshops where stable performance and flexible operation are essential. Its 3500 × 2000 mm working platform provides sufficient space for handling large slabs, while the 600 mm maximum lifting stroke gives the cutting head enough movement for different material thicknesses.

The machine can be used for straight cutting as well as 45° plunge and miter cutting. This makes it suitable for countertop fabrication, kitchen worktops, vanity tops, flooring components, wall panels, and other architectural stone products.

For manufacturers looking for a dependable granite countertop cutting machine, the HLSQ-1000 combines a strong bridge structure with automatic positioning and controlled cutting movements, helping operators maintain consistent results from one slab to the next.

The HLSQ-1000 uses a Siemens PLC control system to manage the machine's main operating functions. Compared with purely manual equipment, PLC-based control makes repetitive production easier to organize and helps operators work with greater consistency.

The control system manages movements such as:

Cutting head operation

Tool slide reciprocating movement

Crossbeam movement

Cutter lifting

Table positioning

Cutting sequence control

This setup is particularly useful for workshops handling multiple orders with different slab sizes and cutting requirements.

One of the practical advantages of the HLSQ-1000 is its multifunctional working table.

The table can tilt up to 85°, making slab loading and unloading more convenient. It can also rotate through 360°, allowing the operator to adjust the slab orientation without repeatedly repositioning the material manually.

A rotating table is especially useful when processing countertop pieces or slab edges that require different cutting directions. Combined with the machine's automatic movement system, it helps reduce unnecessary handling during production.

Countertop and architectural stone projects often require more than simple straight cuts. The HLSQ-1000 cutting head can tilt up to 45°, allowing the machine to perform miter cuts for applications such as countertop edges, waterfall panels, decorative stone components, and other fabricated products.

This capability gives workshops more flexibility without requiring a separate cutting machine for angled work.

The machine also supports laser-assisted slab positioning. The laser helps operators identify the intended cutting line more clearly, which can make material positioning faster and reduce positioning errors before cutting begins.

The HLSQ-1000 can process a wide range of commonly used stone materials, including:

Granite

Marble

Quartzite

Artificial marble

Other suitable natural and engineered stone slabs

For granite fabrication, the machine is particularly useful when accurate sizing and repeatable cuts are required. A suitable diamond blade combined with the correct cutting parameters allows the machine to process different granite slabs according to their thickness and hardness.

As a versatile granite countertop cutting machine, the HLSQ-1000 can be integrated into countertop production workflows where straight cuts, angled cuts, edge preparation, and repeated slab processing are part of daily production.

The above configuration gives the HLSQ-1000 a good balance between cutting capacity and workshop practicality. The 22 kW main motor provides the cutting power required for demanding slab applications, while the separate motors for tool-slide, crossbeam, and lifting movements allow the machine to perform different operations with controlled movement.

In stone fabrication, productivity is not simply about cutting faster. Stable positioning, convenient loading, repeatable movement, and reduced manual handling can have an equally important effect on the overall workflow.

The HLSQ-1000 addresses these requirements with several practical features:

Large cutting capacity:
A maximum cutting length of 3500 mm and cutting thickness of 400 mm allow the machine to handle a broad range of slab fabrication jobs.

Flexible material positioning:
The 360° rotating table and 85° tilting function make it easier to position large and heavy slabs.

Angled cutting:
The 45° tilting cutting head provides additional possibilities for miter-cutting applications.

Accurate positioning:
The laser positioning system helps operators align the slab before starting the cutting process.

Stable control:
The Siemens PLC system provides centralized control of the machine's operating movements.

The machine can be used in different areas of stone fabrication, including:

Granite countertop production

Kitchen worktop fabrication

Marble slab cutting

Quartzite processing

Vanity top manufacturing

Architectural stone fabrication

Flooring and wall panel production

Custom stone projects

Stone edge and miter-cutting applications

Its combination of straight and angled cutting capabilities makes it suitable for both standard production and customized stone fabrication.

A stone cutting machine should fit the actual workflow of a fabrication shop rather than simply offer a long list of specifications. The HLSQ-1000 focuses on several functions that operators use every day: material positioning, cutting movement, slab handling, angled cutting, and automated control.

With a 3500 × 2000 mm working platform, Φ400–1000 mm blade range, 400 mm maximum cutting thickness, 360° table rotation, 85° table tilting, and 45° cutting-head tilting, the machine provides a flexible platform for professional slab processing.

For workshops that need a reliable bridge saw for granite and other stone materials, the HLSQ-1000 offers a practical combination of cutting capacity, automation, and operational flexibility.

The Hualong HLSQ-1000 is built for stone fabricators who need dependable performance across everyday slab-cutting jobs. Its Siemens PLC control, laser positioning, rotating and tilting worktable, 45° miter-cutting function, and 400 mm maximum cutting thickness make it suitable for a wide range of professional applications.

Whether you are producing granite countertops, marble vanity tops, quartzite worktops, or custom architectural stone components, the HLSQ-1000 provides a solid and flexible cutting solution for modern stone processing workshops.