Cleaning methods for block cutting machines, especially for removing residue generated during concrete block cutting, can be summarized in the following two main approaches:
1. Automatic Cleaning Mechanism
Spray Nozzle Rinse: Cleaning pipes and nozzles installed on the side wall of the machine frame directly rinse the blades or wires, preventing the concrete from drying out.
Rotating Component Assistance: Utilizing electric push rods, racks, gears, etc., to drive the nozzles to rotate, expanding the cleaning coverage area for more comprehensive cleaning.
Booster Pump Enhancement: Some systems are equipped with booster pumps to increase water flow impact and improve cleaning efficiency.
2. Manual Cleaning Method
After stopping the machine and disconnecting the power, use a high-pressure water gun or hose to rinse the blades, wires, and work surface.
Using Brushes: Use a stiff-bristled brush or wire brush to remove adhering concrete residue.
Regular Lubrication and Inspection: Lubricate moving parts after cleaning to prevent corrosion.
