Equipment Inspection: Before starting, check the saw blade, guide rails, frame, and motor to ensure there is no looseness or abnormality.
Workpiece Securing: Place the material to be cut on the worktable and secure it with clamps to prevent movement during cutting.
Cutting Parameters: Set the saw blade speed, cutting depth, and bridge travel speed according to the material thickness, hardness, and cutting requirements.
Cutting Operation: Start the saw blade and slowly advance it along the predetermined path to cut the workpiece. For thick plates or hard materials, layer cutting can be performed.
Cooling and Protection: Use a water spray or liquid cooling system during cutting to reduce saw blade temperature and minimize dust dispersion; operators should wear safety goggles and gloves.
Cutting Completion: After cutting, turn off the equipment and clean up dust and debris.
